Skip to content

The Difference Between a Rollover and Inverted L Touchless Car Wash

Mark-VII-AquaJet-XT-Machine

Why the Mark VII AquaJet XT Rollover Touchless Car Wash offers more features than an  Inverted L Touchless

When it comes to touchless car washes, the options available can vary significantly depending on equipment design. Introducing the Mark VII AquaJet XT Rollover, the gold standard in touchless car wash technology. This advanced system showcases the benefits one gets from a Rollover vs. an Inverted L  touchless car wash, with precision vehicle contouring, powerful Hydra-Flex Turbo Nozzles, and superior wheel cleaning options that deliver a spotless clean without ever touching your car’s surface. While both systems provide a touch-free car washing experience, there are key differences that place the AquaJet XT in a league of its own.

Let’s check out the difference between a Rollover and Inverted L Touchless Car Wash—see why the Mark VII AquaJet XT Rollover stands out for quality and performance.

Understanding Touchless Car Washes

Before diving into the specifics, it’s important to note that touchless car washes, regardless of the system, have distinct advantages over friction-based car washes. The primary benefit is that there’s no physical contact with your vehicle’s paint or bodywork. This eliminates the risk of scratches, swirl marks, or damage to mirrors and moldings that can often occur in traditional brush-style car washes.

While any touchless car wash is better for your vehicle’s exterior than a friction-based automatic car wash, choosing the best technology ensures your car gets the clean it deserves. The Mark VII AquaJet XT is a high-performance machine designed for optimal cleaning through advanced engineering.

The Mark VII AquaJet XT Rollover: Precision Meets Power

1. Superior Vehicle Contouring Technology

The Mark VII AquaJet XT uses cutting-edge contouring technology, meaning the machine can adjust its cleaning boom to follow the shape of your vehicle. Low sports cars to tall SUVs, all get equal attention. This ensures that every surface, from the hood to the roof, receives the same cleaning power. The top wash boom drops down to clean lower areas like the hood and trunk, while seamlessly contouring over higher surfaces like the roof, ensuring an even and thorough cleaning.

On the other hand, Inverted L systems lack this vehicle-contouring capability. While they can measure the sides, front, and rear of the vehicle, the hood and trunk receive less direct washing pressure because the machine cannot contour to these surfaces. As a result, certain areas may not receive the same level of attention and cleaning power.

2. Turbo Nozzles for Enhanced Cleaning Power

Mark-7-XT-Hydra-Flex-Blast-Tech-Turbo-Nozzle
Mark-7-XT-Hydra-Flex-Blast-Tech-Turbo-Nozzle

One of the most impressive features of the Mark VII AquaJet XT is its use of Hydra-Flex Turbo Nozzles, particularly the Blast-Tec Pro nozzle. These nozzles provide a 0-degree direct spray, which rotates to create a 24-degree cone of cleaning power, giving your car a superior clean. With 28 turbo nozzles working in unison, dirt, grime, and road debris don’t stand a chance.

In contrast, Inverted L systems typically use less effective, stationary v-jet fan nozzles, which don’t rotate and therefore provide less coverage. While they may get the job done, they lack the impingement and coverage of the Mark VII’s premium turbo nozzles.

3. Even Presoak Application for a Uniform Clean

Pre-soaking is an essential step in the car wash process, as it helps loosen dirt before the high-pressure wash. The Mark VII AquaJet XT evenly applies pre-soak (double pass on all wash packages) to all sides of the vehicle, ensuring equal dwell time (the amount of time the pre-soak has to break down grime) for the entire car. This results in a consistent clean across all surfaces.

In comparison, Inverted L systems often apply pre-soak in a wrap-around manner, starting from the front of the vehicle and working down one side before moving to the back and the other side. This uneven application leads to inconsistent dwell times, with the front and driver’s side getting the most soak time, while the rear and passenger side may receive less.

4. Optional Wheel Scrubber for Stubborn Debris

The Mark VII AquaJet XT takes wheel cleaning to the next level with its WheelJet friction brushes. These optional brushes, which can be selected as part of a premium wash package, are designed to scrub wheels clean of tough brake dust and grime. The soft nylon brushes rotate in both directions while high-pressure jets blast away debris, providing superior wheel cleaning.

Unfortunately, most Inverted L systems do not offer this feature, relying solely on water jets to clean wheels, which often results in less satisfactory results.

5. Onboard Heated Presoak for Maximum Efficiency

The Mark VII AquaJet XT also boasts an onboard heated pre-soak system. Heated pre-soak solutions are more effective at loosening tough dirt and grime than cold solutions. The onboard heating ensures that the pre-soak is delivered at the optimal temperature year-round for maximum effectiveness.

While Inverted L systems do offer heated pre-soak, the solution is often heated in a remote room and delivered through long chemical feed lines. This can cause the pre-soak to cool down, especially during winter months before it reaches your vehicle, reducing its cleaning power.

Water Quality: Soft Water is all We Use

A key advantage of Anytime Touchless Car Wash paired with the Mark VII AquaJet XT technology, is that we only use soft water for all phases of the car wash, from the chemical application to the high-pressure rinse. Soft water is crucial for preventing hard water spots and ensuring a shiny, streak-free finish. While we can’t speak for every competitor, many operators use hard city water, which can leave unsightly mineral deposits on your car if not thoroughly rinsed during the final spot-free pass.

Always feel free to ask your car wash provider about the quality of water they use. A reputable operator will be transparent about whether they use soft or hard water, and whether their water is recycled or fresh.

Why Choose Touchless?

After-and-Before-Washed-Truck
After-and-Before-Washed-Truck

Whether you opt for the Mark VII AquaJet XT or an Inverted L system, touchless is always a better choice over traditional brush-laden washes. Touchless washes minimize the risk of damage to your car’s exterior, and they’re gentler on your vehicle’s paintwork. When considering the long-term care of your vehicle, a touchless wash is one of the best ways to keep your car looking its best without compromising its finish.

However, when you’re looking for the best in touchless technology, the Mark VII AquaJet XT stands out with its advanced features, precision cleaning, and consistent results.

Minor Advantages of the Inverted L System

While we feel the Mark VII AquaJet XT is superior in many aspects, we recognize that the Inverted L system has its place. For example, Inverted L systems can accommodate larger vehicles like dualies, which will not fit into the AquaJet XT systems that employ wheel scrubbers. Additionally, some drivers may find the Inverted L system easier to navigate, as it requires slightly less precise vehicle positioning compared to the AquaJet XT, which uses sensors to properly clean the wheels.

The Future of Touchless Car Wash Technology

As touchless technology continues to evolve, manufacturers like WashTec/Mark VII are pushing the boundaries of what’s possible in the world of vehicle cleaning. With over 35,000 car washes worldwide using WashTec/Mark VII equipment, the company is a global leader in the industry, providing more than 2.75 million washes a day.

Conclusion: For the Best Clean, Use the Best Machine

Mark-VII-AquaJet-XT-Machine
Mark-VII-AquaJet-XT-Machine

For car owners who want to protect their vehicle’s surface from the potential damage caused by friction washes or harsh chemicals used in traditional car washes, the choice is clear. While automatic car washes and soft touch washes may seem convenient, the cleaning process in a friction wash can lead to scratches and swirls on your car’s paint. Opting for a touchless automatic wash ensures your vehicle gets a thorough clean without any risk of damage along with many other benefits. Unlike a hand wash, which can be inconsistent, our advanced touchless system is gentle on your car while delivering exceptional results.

When it comes to touchless car washes, we believe the Mark VII AquaJet XT that Anytime Touchless Car Wash uses, delivers a superior clean through advanced technology, precision, and efficiency. While the Inverted L type can provide a good wash, they generally don’t offer some of the advanced features built into the Mark VII AquaJet XT. For a car wash experience that combines state-of-the-art engineering with proven cleaning power, the Mark VII AquaJet XT is the clear choice.

Experience the difference between a Rollover and Inverted L Touchless Car Wash. Skip the outdated methods and come to Anytime Touchless Car Wash for the best car cleaning in Phoenix – where your car’s safety and shine are our top priority!

FAQS

  • Will a high-quality car wash get my car evenly cleaned?
    The Mark VII AquaJet XT uses advanced contouring technology that adjusts to the shape of your vehicle, from low-lying sports cars to full-size SUVs, ensuring even cleaning of the hood, roof, and trunk.
  • Do high-quality car wash machines have more power than regular ones?
    The Hydra-Flex Turbo Nozzles rotate to create a cone of cleaning power, delivering higher water pressure and better coverage compared to stationary nozzles in other systems.
  • Why is heated pre-soak important in a touchless car wash?
    Heated pre-soak solutions help loosen dirt and grime more effectively than cold water, allowing for a more thorough clean without needing harsh chemicals.
  • Does the Mark VII AquaJet XT provide wheel cleaning?
    Yes, the Mark VII offers an optional WheelJet system that combines friction brushes with high-pressure jets for superior wheel cleaning, which is not available in most Inverted L systems.